SilverWolfLV999 nude&half nude&slider V1.032

关于手消失的问题，目前发现是集显或是A卡才有的问题，需要更新core文件中的hlsl文件，请等待XXMI的更新(SRMI V2.4.1，应该就在这两天) / Regarding the issue of hand disappearance, it has been found that it is a problem only with integrated graphics or AMD. The hlsl file in the core folder needs to be updated. Please wait for the XXMI update (SRMI v2.4.1, which should be available in the next couple of days).

V1.032修复了昔涟大招选择时候的贴图问题 / V1.032 fixed the texture issue during Cyrene's ultimate skill's candidate phase.

V1.031修复了跳蛋的线模型消失的问题 / V1.031 fixed the issue of the vibrating egg's line model disappearing.

V1.03修复了大腿形态键出现的穿模问题，修复了丝袜+鞋的情况下臀部形态键会导致模型点错误位移的问题 / V 1.03 fixed the clipping issue with the thigh shape key and fixed the issue where the butt shape key would cause incorrect model point displacement when wearing stockings and shoes.

V1.02优化减少了模型点数（由于很多人都反应很卡，因此在保证功能不受影响的情况下尽量降低了30%的模型点数，如果还卡的话，那只能去使用香蕉网的精简版了） / V1.02 optimized and reduced the number of model points (Due to numerous reports that using this MOD causes severe lag, I have reduced the model point count by up to 30% while ensuring functionality remains unaffected)

V1.01更新了低画质的hash / V1.01 updated the hash at low graphics settings

银狼LV999的MOD，注意更新Core才能使用（见下面特别注意事项）。按/可以打开界面，可以翻页（共有两页，完整版有三页），注意所有操作都要按住Alt的情况下再用鼠标点击和拖拽，也可以用方向键进行操作。有问题欢迎留言。特别注意事项：1.银狼LV999需要用到特殊的CS和hlsl，所以要更新Core文件夹，因此XXMI的SRMI必须更新到V2.4.12.由于模型特殊性，对以往控制形态键的hlsl也做了修改，之前是不推荐MOD共用res文件夹内的内容，现在是不能共用res文件夹的内容。3.代码透明会导致动作1出现异常发光现象，这个没办法4.注意不要给文件夹名称中加上点，会导致形态键崩掉：“LV.999”这个中间的点不能有Silver Wolf LV999's MOD, please update the Core folder in order to use it (see special notes below). Press / to open the menu. All operations on the menu must be performed while holding down the alt key. You need to hold down the alt key and click to toggle, you can also use the arrow keys to operate. If you have any questions, please feel free to leave a message.Special Notes:1. Silver Wolf LV999 requires special CS and HLSL, the Core folder must be updated. Therefore, SRMI must be updated to V2.4.1.2. Due to the specific characteristics of the model, the HLSL that previously controlled shape keys has also been modified. Previously, it was not recommended to share the contents of the res folder across MODs; now, the contents of the res folder must not be shared.3. Code transparency will cause abnormal glowing in Action 1, which is unavoidable.4. Do not to add dots to the folder name, as it may cause the shape key to collapse: "LV.999" →"LV999" 具体包含切换如下所示：The specific toggling is as follows:

说明：1.如果要在启动的时候固定在某个MOD，请阅读readme.txt或是往期教程2.如果想要拆分成单个差分，请参考往期说明3.初次加载MOD的时候很可能出现模型坏掉的情况（具体表现为很多地方向中间收束），传送一下或是切换一下角色就正常了（每次新角色都有人问，以后再看到这种问题不再回答了），如果依旧有问题，检查下mods文件夹内是否有core文件夹，有的话删掉它（不少人有这个问题，不清楚是谁做的合集还是什么，有人下了过后mods文件夹带有了这个core文件夹，这个文件夹应该是和mods文件夹在同一个目录下的而不是在mods文件夹里面，XXMI会自带这个core文件夹，因此不需要移到外面覆盖，直接删掉就行了）。4.有时候屏幕上会不间断出现瞬时的人物被拉成面条状的情况，这个也是3.2后出现的，似乎是3dm的bug，通常降低画质可以缓解，没其他办法解决5.如果出现模型显示不完整的情况，要么是使用MOD管理器导致（在设置中关闭修复），要么是用的不是最新版XXMI6.窗口模式是无法打开菜单的，如果遇到全屏依旧无法按/打开菜单的问题，请在ini中找到下面内容：[KeyMenu]condition = $active == 1key = no_modifiers /type = cycle$menu = 0,1修改key = 后面整段内容为你想要的快捷键illustrate:1. If you want it to remain a certain MOD everytime game starts, please read readme.txt or previous tutorials.2. If you want to split it into individual variations, please refer to the instructions from my previously released MOD.3. When you first load the MOD, the model may be broken (many places on the model converge to the middle), teleport or switch characters, and the MOD will display normally (Every time a new character's MOD is released, someone will ask this question. I will no longer answer this question when I see it in the future)4. Sometimes the screen will continuously show the instantaneous characters being pulled into noodles. This also appeared after 3.2. It seems to be a bug of 3dm and cannot be solved (lowering the image quality may help). If you still have the problem, check if there is a "core" folder in the mods folder, if so, delete it5. If the model is not fully displayed, it is either caused by using the MOD manager (turn off the repair in the settings) or not using the latest version of XXMI6. The menu cannot be opened in window mode. If you encounter issues with pressing / opening the menu even in full screen, please find the following content in ini file:[KeyMenu]condition = $active == 1key = no_modifiers /type = cycle$menu = 0,1Change the entire section after "key = " to your desired shortcut key.

PS：用滑块后可能会有些地方存在不可抗力的穿模等问题，这个我也没法一一去测试，有问题可以截图发出来看看能不能修。